Another N Scale Micro Layout!

Share it with your friends Like

Thanks! Share it with your friends!

Close

Modelling n gauge train sets -Remarkable Concepts For Designing n gauge train sets

Model Railway Track Planning Tips And Tricks For Everyone

Some Helpful Advice Abouts Model Railway Track Planning.

Probably the most difficult model train track plans would be to produce everything based around a styled theme. You can decide on a lot of different themed styles to follow and create. You can replicate a specific time period from history. Some of the most well-known to produce would be the wonderful period of the 18 100s which usually see the train going through little outlying towns.

You will find a large number of model train track plans. However these model train track plans are generally categorized into two types: the continuous run designs as well as the modular types.

Initially when i first began with model train trains, the best way to design the model train track back then would be to painstakingly draw them all out by hand. This meant any errors had to be erased or scribbled out and redrawn. It was somewhat of a hit and miss process which took a really very long time and a lot of skill to get perfect. The issue was that even if you have drawn everything you thought were great plans, they would not at times work out perfectly in real life and adjustments had to be made simply because you’d added an error in the design.

Fast forward to the present day and this entire process has been made a great deal simpler by using professional software programs, which are made for the purpose to help you with creating your model railway track plans. If you are not a specialist, don’t worry as these may vary from quite simple pieces of point and then click software programs, right up to far more comprehensive bits of equipment if that’s what you might be after.

Model Railway Track Planning Can Change Your Life.
Computer systems have transformed the way you look at daily jobs and have made our everyday life a lot less complicated and much easier in lots of ways. You might not have originally considered using a computer for creating your model railway track plans, but specialist software will make the entire procedure much quicker and much easier too.

If you have completed designing your model train track plans on your computer, some software programs will even go so far as to enabling you to figure out a detailed parts lists that you can then use to your hobby shop and buy. This solves needing to work this out on your own, which can be a very time-consuming process. The software could even have the ability to calculate the estimated costs for you, so you can work out what you might accomplish with your specific spending budget.

Looking To Learn About Model Railway Track Plan? Read This.
Using your computers mouse as you would to produce the model railway track plans in the first place, it is just a case of dragging and dropping components from the list onto you layout plans and organizing them as you wish. It’s also possible to try out certain features in various colours, if you wanted to produce an autumn woodland scene, you can color all of them with yellows, pinks and orangesreds and yellows.

*A fixed eight track: This is among the most well-known model train track plans. This design has a single track which operates around two ovals. It’s possible to run 2 trains on this track but you have to make sure that they do not crash.

* A main line terminus: This is one of the much more elaborate model railway track plans. This plan allows the train that is leaving the station to choose any track via the two crossovers points. It also permits the inbound train to choose one of the 4 platforms that are a part of this plan. Apart from these additionally, it features a storage siding intended for locomotives, coaches and carriage.

Solid Advice For Your Model Railway Track Plan Projects

* A round track with sidings and branch line: This is one of the simplest model railway track plans. When you are a beginner within the train modelling world then this track plan is the very best for you.|Within this strategy you are able to run your train inside a clockwise direction. The sidings are then used to receive the loco’s coaches on one side and it also has a goods terminus on the other side.

Some Helpful Advice Abouts Model Railway Track Planning.
* A terminus with a branch line: This track strategy will make you sentimental because it was used for the steam engines. But this is also one of the most fascinating model train track plans. It is simple to include two trains and also freight trains within this model structure. Also having a goods engine shed, a loading bay several platforms and also a run around loop which can make this track much more exciting.

We recommend this site to visit Hornby Railways

Model Railway Track Plan Advice To Get Started Today

Read below for a brief description of how I built this layout. Links to products used in the layout construction can be found below as well. More on my website at: http://www.steves-trains.com
Facebook: https://www.facebook.com/trainsbysteve/
YouTube Page: https://www.youtube.com/stevestrains

First off, I had meant to do a couple videos describing the build of this layout but never had the time to work on those videos. So, here is a general description of how the layout was built.

1. I started with a round pine table top, 24″ in diameter, that I picked up from Home Depot. I actually picked up two 24″ table tops, and 2 18″ table tops. So far, I’ve used two of them for layout projects, and have two I haven’t used yet.

2. I glued on a few layers of 1″ thick foam insulation board. You can use a variety of adhesives, just make sure they are foam safe and don’t eat through the foam. I also usually use some nails in the foam to help hold everything together.

3. I also glued together enough layers of foam to produce the mountain/tunnel portion of the layout.

4. The foam was then carved with a Stanley Surfoam tool like this one here: http://amzn.to/2m8nXpO which works great for carving foam.

5. I used light-weight spackle: http://amzn.to/2CRILMN to fill in any gaps and generally smooth out the scenery.

6. I then glued on some Woodland Scenics plaster rocks using hot glue in various locations. I mostly used these rock casting from Woodland Scenics: http://amzn.to/2CQm4Zj

7. The layout was painted with a tan/brown colored paint, any water based paint will work fine.

8. I used Kato Unitrack for the track, which was glued down using hot glue. I used 5 sections of 9.75″ radius curves, two 8.5″ radius curved pieces and two short ~1.5″ straight sections along with one curved viaduct. I used a set of terminal rail joiners to supply power. I cut the plug off the end of the rail joiners so I could connect to a power supply.

9.75″ radius curves: http://amzn.to/2m7gWpk
8.5″ radius curves: http://amzn.to/2m7GlPL
1.5″ straight: http://amzn.to/2CHeTzD
curved viaduct: http://amzn.to/2CGXp67
terminal rail joiners: http://amzn.to/2m6Atq7

9. The Kato Unitrack was ballasted with Scenic Express ballast. I don’t remember the exact kind I used, but the natural stone type ballast is a little easier to use than the Woodland Scenics ballast which is light weight and tends to float away easier when you try to glue things down. I basically applied a layer of the ballast on both sides of the track with a little down the middle. It helps to paint a layer of glue on the sides of the unitrack and along the ground on either side of the track to make sure the bottom layer of ballast is firmly attached. After the ballast was in place I applied some rubbing alcohol and then a glued everything down with scenic cement: http://amzn.to/2CF7mRv.

10. Next came applying the scenery materials. I first painted everything with a layer of regular white glue. I pick this up in gallon jugs at Office Depot for a pretty reasonable cost. I then covered everything with a layer of Scenic Express dirt: https://goo.gl/BZWTGv, then a layer of burnt grass turf: http://amzn.to/2CHfeSV and then after applying more scenic cement, coated everything with static grass: http://amzn.to/2CFVzmj Static Grass applicator: http://amzn.to/2Fh4z2S

11. Along the river area I applied some talus and other small rocks: Fine Talus: http://amzn.to/2CO6FJh Medium Talus: http://amzn.to/2CUXNlb
I used a variety of trees and clump foliage around the layout such as these:
JTT small wire trees/branches: http://amzn.to/2CTkBl0 (light green)
JTT small wire trees/branches: http://amzn.to/2AG6Kt2 (medium green)
General trees: http://amzn.to/2DbpEv7
Woodland Scenics clump foliage for shrubs: http://amzn.to/2CH2c7E
I also painted a little glue on the tops of the static grass near the river area and sprinkled on some red and yellow ground foam to give the appearance of flowers.

12. For the river, I painted on multiple layers of Mod Podge: http://amzn.to/2FeO5Z6 to gradually build up the water. For a flat river I would use envirotex, but since the river was sloped on this layout, something that doesn’t tend to run off was needed. For the waterfall, I used Woodland Scenics
Water Effects: http://amzn.to/2CGY1IX
I used some additional water effects to attach the waterfall and blend it into the river at the top and bottom.

13. The edges of the layout were painted black, since I prefer that, but some people prefer a greenish or other more neutral color.

14. Any train set power supply can work for supplying power, or you could connect a DCC or other control system.

Comments

Write a comment

*********COMPENSATION DISCLOSURE******** Unless otherwise expressly stated, you should assume that the links contained on this site may be affiliate links and the author will earn commission if you click on them and buy the product / service mentioned in this post. We recommend this site to visit Hornby Railways

Many Thanks For Visiting Our Video Blog. ***** Share The Love!

CONTACT US*****DISCLAIMER*****DMCA*****PRIVATE-POLICY*****TERMS